italmanometri  

 
pressure gauges - industry - pressure instruments

“Solid-Front” pressure gauges polypropylene case series : MNS-CF
Polypropylene solid-front pressure gauge series MNSS-CF is ma-nufactured in according with safety expecifications of UNI 8451, DIN 16006 and ANSI B40.1. They are applied to the food, drink, refrigeration, petrolchemical processing and so on, and the oc-casions where both environment and medium are strict. The case is solid with knock down back case and burst disk inside.

download datasheet

MQ

MQ – MQG PRESSURE GAUGES
Particularly tough and precised gauges for general use;
they can be used in every field of industry for the measurement
of non-agressive and non-crystallizing fluids.
Series MQG LIQUID FILLED
Same gauge of MQ series but filled with liquid to reduce
the stresses caused by the vibrations of the installation,
pulsating pressures or water hammers.
DIAL SIZE (DS): mm 63 – 80 – 100 – 150
CA SE AND RING: AISI 304 stainless steel with bayonet
clutch (except for MQ Ø 63); nitrile rubber NBR safety
plug.
MOVEMENT : brass.
Range: from 0/0.6 to 0/600 bar or vacuum.

download datasheet

MX MXG

MX – MXG STAINLESS STEEL PRESSURE GAUGES
Series MX
Entirely manufactured in stainless steel, they are particulary resistant to bad conditions of exercise and environment. They are used in chemical, petrochemical, canning, food and pharmaceutical industry.
Series MXG LIQUID FILLED
Same gauge of MX series but filled with liquid to reduce the stresses caused by the vibrations of the installation, pulsating pressures or water hammers.
DIAL SIZE (DS):
mm 63 – 80 – 100 – 150 – 200 – 250 MX
mm 63 – 80 – 100 – 150 MXG
CA SE AND RING: AISI 304 stainless steel with bayonet
clutch; nitrile rubber NBR safety plug.
MOVEMENT : AISI 304 stainless steel.
Range: from 0/0.6 to 0/1600 bar or vacuum.

download datasheet

mxsf

MXSF – MXGSF SOLID FRONT STAINLESS
STEEL PRESSURE GAUGES


Series MXSF
Completely manufactered in stainless steel, they are suitable to the worst and different working conditions in every industrial field. They are particulary recommended for the operator safety, because in case of loss or a breaking of the sensing element, the internal pressure makes the exploding bottom of the gauge detach while the solid front remains intact.
Series MXGSF LIQUID FILLED
Same gauge of MXSF series but filled with liquid to reduce the stresses caused by the vibrations of the installation, pulsating pressures or water hammers.
DIAL SIZE (DS): mm 100 – 150
CA SE AND RING: AISI 304L stainless steel with bayonet
clutch; nitrile rubber NBR safety plug. Blow out back in
AISI 304L ss.
MOVEMENT : AISI 304 stainless steel.
Range: from 0/0.6 to 0/1600 bar or vacuum.

download datasheet

MH25 - PRESSURE GAUGES FOR HIGH PRESSURE Ø 150


These reinforced and refilling pressure gauges offer all safety conditions for high pressure measurement on liquid and gas fluid circuits compatible with stainless
steel (fluid to be indicated).

Range: 1600 - 2000 - 2500 - 3000 - 4000 bar
GO TO OFFICIAL WEBSITE
mpq

MPQ – MPR EDGEWISE PRESSURE GAUGES

Gauges suitable to be used in control panels and in centralised control rooms; they are available with a plastic square case (MPQ) or a rectangular case (MPR ), and
mounted trough two back brackets. The rectangular version both fits the horizontal and the vertical mounting. They can be used for all types of gases and liquids
wich do not obstruct the measuring system.
NO MINA L SIZE :mm 96 x 96 – 144 x 144 – 144 x 72
CA SE: fenolic resin.
MOVEMENT : AISI 304 stainless steel
Range: from 0/0.6 to 0/1600 bar or vacuum.

download datasheet

MMX

MMXS –HORIZONTAL DIAPHRAGM
PRESSURE GAUGES FOR HIGH OVERPRESSURE


Gauge particularly suitable for high viscosity and high crystallization fluids and in general every time corrosive gases and liquids are used. The type of connection
to the process can be threaded or flanged with joint pins. The sensing element is formed bya corrugated diaphragm which is clamped horizzontaly between two
flanges.
DIAL SIZE (DS): mm 100 – 150 – 200
CA SE AND RING: AISI 304 stainless steel with bayonet
clutch; nitrile rubber NBR safety plug.
MOVEMENT : AISI 304 stainless steel.
Range: from 0/25 mbar to 0/16 bar or vacuum.

download datasheet

MM

MMB –DIAPHRAGM PRESSURE GAUGES

Gauge particularly suitable for low pressure.
The sensing element is formed by a corrugated diaphragm which is clamped horizontally between two welded bodies.

DIAL SIZE (DS): mm 100 - 150
CA SE AND RING: AISI 304 stainless steel with bayonet
clutch; nitrile rubber NBR safety plug.
MOVEMENT : AISI 304 st. st.
Range: from 0/25 mbar to 0/6 bar or vacuum

download datasheet

MC

MC – CAPSULE PRESSURE GAUGES
Gauges used to measure low pressures of clean and non aggressive gases without condensate. They are generally used for ventilation and conditioning systems,
gas distribution nets or leak survey systems. They need a special care for the mounting and the functioning, being very sensible and they have to be protected
against pushes and vibrations. The measuring capsules formed by two corrugated diaphragms, welded each other and located parallely to the dial.
DIAL SIZE (DS): mm 63 – 80 – 100 – 150
CASE AND RING:
• Ø 63 and 80 in chromium plated steel; fixing with
screw.
• Ø 100 and 150 AISI 304 stainless steel; bayonet clutch.
MOVEMENT : brass.
Range: from 0/25 mbar to 0/400 mbar or vacuum.

download datasheet

MDC

MDC –DIFFERENTIAL PRESSURE GAUGES
They are used for the measurement of differential low pressure also with hight static pressures, and for the measurement of filter obstructiens, loses of loading,
differences in flows and levels. The measuring element is a diaphragm on wich the pressures of the two sides operate oppositely; the difference between the two
pressures produces the consequent shifting, which is trasmitted to the movement and to the pointer.
DIAL SIZE (DS): mm 150
CASE AND RING: AISI 304 stainless steel with bayonet
clutch.
MOVEMENT : AISI 304 stainless steel.
Range: from 0/25 mbar to 0/16 bar or vacuum.

download datasheet

mndpa2

MN / DPA2 - DIFFERENTIAL PRESSURE GAUGES FOR LOW PRESSURE
0/60 PA max 0/2,5 KPA .
Differential pressure gauges for low pressure.
Minimum range

download datasheet

DIFFERENTIAL PRESSURE GAUGES WITH MAGNETIC PISTON
The differential pressure gauge with piston series MNSS-DPP are placed in two models :
- MNSS-DPP : piston (for air/gas) ;
- MNSS-DPPS : piston with separating diaphragm (for fluids).
The main uses of these pressure gauges are on air filters, pumps, cooling plants etc. The most relevant advantages are low cost, low weight, overload capacity, maximum working pressure and versatility. Infact on these pressure gauges can be applied reed contacts and three holes front flanges for panel mounting.

download datasheet

differenziale flessibile

FLEXIBLE DIFFERENTIAL PRESSURE GAUGE

download datasheet

MMX - ALL STAINLESS STEEL CAPSULE PRESSURE GAUGES
These instruments are created to measure very low pressure and depression from 0/25 to 0+1000 mbar for use on gas and dry air where there are particular conditions of aggressiveness.

DATASHEET Ø 60
DATASHEET Ø 80
DATASHEET Ø 100
DATASHEET Ø 150
DATASHEET Ø 200
MM - CAPSULE PRESSURE GAUGES
These instruments are created to measure very low pressure and depression from 0/25 to 0+1000 mbar for use on gas and dry air .

DATASHEET Ø 60
DATASHEET Ø 80
DATASHEET Ø 100
DATASHEET Ø 150
DATASHEET Ø 200

POTENTIOMETRIC TRANSMITTER PRESSURE GAUGE SERIE MNSS-TR

DOWNLOAD PDF

 


Indirizzo loghino